How to set up the Jobe Infinity Pool

How to set up the Jobe Infinity Pool

Create your own swimming area with this 4x4m inflatable sea pool which is easy to attach to the platform of your boat. The 2m deep, mesh net will keep the (jelly)fish away. Go for a Care Free swim.



Here you can find step-by-step how to set up the Jobe Infinity Pool:

• Unroll the pool on the platform of your boat.
• Place the corner of the pool where the valve is located on the platform of your boat.
• Connect the rope to the D-rings next to the valve, so you can attach the Island to the two corners of the boat.
• Open the valve of the Pool.
• Inflate the Infinity Pool with the battery powered pump to the recommended pressure of 6 psi. The Pool will unfold itself while being inflated.
• The pump will automatically shut off when the set pressure is reached.
• Disconnect the pump and close the valve.
• Place the pool in the water. The small rings should be closest to the platform of your boat.
• Inflate the Transom Bumpers and strap them down tightly next to the platform of your boat. Always use two to be safe!
• Open the lock mount and mount the ladder.
• Close the mount and it’s secured.
• Place the straps onto the ladder. Adjust the straps if needed.

Now you are ready to have fun on the water!

Check out the video below to see how it’s done!