How to use the Jobe triple action pump

To start, you connect the hose to the pump and on the other end at the SUP. Make sure that the valve on your SUP is closed.

Step 2: Inflate the SUP (part 1)
Switch the Action Control level of the pump to 1 and start pumping until it gets too heavy. 

Step 3: Inflate the SUP (part 2)
When pumping on setting 1 is too heavy, you can switch to the next setting. In setting 2, you can inflate your SUP and again, pump until it’s getting too heavy.

Step 4: Inflate the SUP (part 3)
Switch to setting 3 and inflate the SUP to the maximum of 21 psi. Pump until you have reached your preferred psi by checking the meter on top of the pump.

Step 5: Disconnecting
When your preferred psi is reached, disconnect the hose from the valve and close the valve back down.

That’s all! Take a look at the video below to see how it’s done.