Jobe’s Electric air pump has an easy battery powered system to inflate your SUP without any effort. Take your new portable friend everywhere and pump up your SUP up till 21 PSI in a few minutes and deflate the board after your travel. The pump comes with 4 different nozzles and a handle for easy carrying. With the Portable Electrical Air pump you can save your energy for what matters: paddling. This pump comes with a heat shielding protective bag to protect your pump from water, hot sunlight and impact damage. The bag has an easy exit point for the hose so you can pump your sup from within the bag if needed.
Step 1: Charging the pump
To use the Jobe portable electric pump, you need to charge it first. Insert the fuse and connect the charger from the pump to a power point. Charge until the green light on the adaptor appears.
Step 2: Preparing After fully charged, you can unplug all the cables and store them in the bag. Connect the hose to the pump and to the valve of the SUP.
Step 3: Inflating the SUP
Once the hose is attached, you can set the desired psi for your SUP by rotating the button on the pump. When the psi is set, you can push the “on” button to start pumping the SUP. After that, the pump will do the rest and you can do whatever you like. When the SUP is fully inflated, the pump will shut down automatically. At this point, you can unplug the hose and close the valve.
Now you are ready for your SUP session! Watch the video below to see how it’s done.
Trage dich in unseren newsletter eind und erhalte eine kostenlose wasserdichte Handytasche mit deiner ersten Bestellung!
0Einkaufswagen 
.jpg)
